Even known as something like the Honda Jazz, the Honda Fit is indeed a five-door B-segment subcompact vehicle or supermini built by Honda since about the early 2000s. In their fourth generation, Fits have seen their fair amount of upgrades, along with the 2010 hybrid petroleum-electric model.
Despite these variations, their cube shape has remained largely unchanged. The Honda Fit’s success stems from its aesthetic, accessibility, and functionality, but it’s simple to find the Best honda fit mods, the majority of which are suitable with all versions.
Even though this standardized strategy may not be appealing among some, the advantage is that it makes servicing the vehicle a bit cooler and helps with the performance.
Top 3 Picks
The list is based on our research about the new mods available in the market, their features, the best prices on Amazon and reviews about them.
From getting the reviews from various sites to checking the best honda fit mods, we came up with this appealing list of mods that have up-to-the-mark efficiency, are easy to install, and have good durability.
These top picks are also easily accessible through various online automobile shops, especially from Amazon. You can attain the level of performance you desire with these Honda fit mods from amazon.
Turbocharger Kits & Supercharger Kits For Honda Fit
The Honda Fit comes standard with a commendable amount of power, big props to its 1.5-liter, four-cylinder engine, which produces 130 horsepower and 114 lb-ft of torque in 2020 model types.
When teamed with a six-speed manual gearbox or a CVT, you must always be able to reach 60 mph in 8.2 seconds.
Older models Honda Fits from 2009 to 2014 can indeed be heavily modified to incredible levels, whereas 2015-2020 models are restricted to bolt-on parts and cold air intakes, so a negative effect on performance.
A turbocharger kit seems to be a supercharger that an exhaust turbine would generate. Turbochargers take advantage of some of the “available” energy that would otherwise be ended up lost in the exhaust.
It enhances the exhaust pressure gradient by pushing the turbine and straining the engine. The total loss is lower in correlation to a direct impact force that moves a supercharger.
- exhaust turbine
- fuel efficiency
- enhances exhaust pressure
- A substantial exceed in horsepower.
- Small engines benefit from increased displacement, which results in increased power.
- Small engines use very little fuel to power down, resulting in better fuel economy.
- It is more efficient because it uses the energy that an engine normally loses.
- Cannot operate on a wide RPM range
- needs oil lubricant to dispense their heat.
- it is expensive
Superchargers need pressurized air to build pressure and perhaps even the flow rate of air entering the engine using a strong mechanical load.
Energy from the crankshaft is used to power superchargers, which are usually powered by a string, cord, or gear. Boosts are almost quick.
- Mechanical load user
- the crankshaft is used to power superchargers
- A boost in horsepower.
- There is no lag.
- The most important feature of a supercharger is the speed with which the boost is activated.
- If people compare to turbochargers, this engine produces incredible power at low RPM.
- A much more cost-effective method of increasing horsepower.
- less efficient
- unreliable because of the exposure to high pressure within the engine
Top 7 Best Honda Fit Mods For Car Enthusiasts
Because later Honda Fits cannot be modified in almost the same way that older models could, they will have to settle for cold air intakes.
This new cold intake valve allows relatively cool air to enter the engine and combustion compartment, increasing speed and responsiveness.
With the advancement of technology in criterion engine management, there is a greater necessity to solve their advanced adaptability is able to manufacture any kind of valuable horsepower.
This seems to be exactly what Injen Technology’s patented MR Technology can do. The pressurized mass air is managed to measure aggression through a sequence of designed and tested air-restricted sections, enabling for appropriate air/fuel calibration.
The ultimate result seems to be more precise and efficient horsepower/torque gains. This innovation is only available to the sports compact market via Injen Technology’s SP line of intake systems.
- air filter
- mass flow detector
- throttle body roll
- have sophisticated variants of the standard intake system
- a cold intake valve allows relatively cool air to enter the engine
- performance upgrades
- best for air flowing
- maintains a factory safe air/fuel ratio
- not that easy to install
- not suitable for older honda
It is indeed a standardized fit for any 2.5-inch exhaust system, so it will fit as long as your pipe is 2.5 inches. It is quite simple to put together and bolts on within minutes. You have the option of using a CV joint, butt joint, a lap joint, a muffler set, or even a U bolt clamp.
The straight-through exhaust system design relieves back pain while absorbing sound waves. Made of stainless steel for long-term durability.
Improves horsepower and torque by 15 to 25 percent in a split second. Whereas ensuring smooth gas flow, intense deep and smooth tone sound increases engine power and performance.
A well-designed efficiency with low-restriction muffler replacements and tuned resonators can have a stunning impact on your car: relatively low car backpressure and a much bigger sound.
- universal size
- butt joint, lap joint and a U-bolt joint
- stainless steel
- Improves horsepower and torque by 15 to 25 percent
- 4-inch exhaust valve
- absorb sound waves
- does not come with a silencer
- requires welding on the exhaust pipe
Compared to conventional copper plugs, firing pin and ground electrode inlay offer an additional 4X the life span.
The 0.6mm thin wire trigger mechanism provides outstanding ignitability and efficiency. A 360-degree consistent laser weld joins a corrosion-resistant firing pin to the bottom for extra strength.
It completely removes erratic starting caused by a lack of fuel mixtures and increased fouling. This Spark Plug features a one-of-a-kind ground electrode intended to maximize a greater spark nucleus at the ignition stage.
This Spark Plug burns leaner compounds than standard plugs and enhances throttle response. Its ground electrode was designed to improve ignitability to improve effectiveness in emission gas purification and energy consumption.
- ground electrode inlay
- 6mm thin wire trigger mechanism
- pre-gapped replacement
- offer additional 4x the life span
- Outstanding ignitability and efficiency
- best match, shape, and operate effectively.
- Increased spark energy results in better flame travel
- enhances throttle response
- the wire boot is not all the way on
- relatively expensive
4- High-Flow Fuel Injector (X AUTOHAUX Fuel Injectors Fuel Injector Nozzle)
Place a high-flow fuel injector in your 2009-2014 Honda Fit if you want to boost your car’s power output and torque.
High-flow fuel injectors quickly maximize fuel supply and mechanization, resulting in a sleeker overall performance. When they should be mainly used for Formula One racing, they are also useful in daily driving.
Fuel injectors allow for quick start-up in cooler conditions; they directly replace your old or broken injectors and require no alteration.
- quick start-up
- boost your car’s power output
- increases torque
- Outstanding response timing
- smooth engine operation
- balanced fuel delivery reducing overall fuel consumption
- easy to install
- Trickles fuel into the throttle body roll
- out of warranty
5- Sway Bars (Metrix Premium Front Left and Right Stabilizer Bar Link K750312 & K750311 Fits 2007-2008 Honda Fit)
Sway bars, also known as stabilizer bars, are being used to keep your car from spinning over. This U-shaped metal arrangement attaches to the front wheels and helps to stabilize the vehicle by transferring load through one end towards the other during such a turn.
Stabilizer bars help shield your suspension and can be a big help on earlier Honda Fit models that are beginning to switch or buckle excessive wear.
Metrix Stabilizer Bar Links are high-quality parts that fit perfectly the first time and are simple to install. They are created, engineered, assessed, and assembled to meet the required OEM standards.
Following Original Parts And components, Link Stabilizers are made of steel, aluminum, or high potency plastic.
Additional amount support is given by higher efficiency grease and good quality rubber boots.
- U-shaped metal arrangement
- made of steel, aluminum, or high potency plastic
- good quality rubber boots
- transfers load from one end to the other
- Cataphoresis plated for added protection
- fit perfectly the first time
- simple to install
- meets the required OEM standards
- alteration might be needed for some honda fit models
- often does not come with a warranty
6- Coilover Suspension (Godspeed MSS0480 MonoSS Coilover Lowering Kit)
Coilover springs are designed to keep the chassis from falling out by facilitating each car tire. It minimizes or mitigates body flip throughout turns, especially with high speeds.
Select these instantly if you’re going to add a super/turbocharger kit to an older Fit to lower bending down when gaining speed. Coilover suspensions work to keep you from diving while you’re attempting to break.
The MonoSS from Godspeed Project is the lone family member of single-adjustable Coilover suspension kits. Those very same coilovers are intended to have been a street race Coilover at a reasonable price.
It has a monotube isolator made of carbon flawless steel 52mm tube and an internal performance piston for optimum shock absorber rebuttal.
To optimize the stability of comfort and durability, the cold-bent coils are made from high intensity SAE9252 steel. Godspeed Project can assure extraordinary damper efficiency at any temperature even off the track, by using race top-notch shock oil.
- Monotube shock design
- Anodized shock body
- Independent ride height and spring preload adjustments
- keep the chassis from falling out
- minimizes body flip throughout turns
- keep you from diving
- extraordinary damper efficiency
- Brake line brackets are also included
- you need to preload the coilovers before you install them.
- not that efficient in new models
7- Wider Wheels (Dorman 939-146 15 X 6 In. Steel Wheel)
Larger wheels provide stronger grip and momentum, minimize conflict all through tighter turns, and provide better deceleration.
Honda should choose 205/45 tires because they provide the width and sturdiness that make driving any generation relatively safe.
You must ensure that the tire size you select is compatible with the generation of your Fit. In any case, BFGoodrich provides quality with all Fits.
- Direct replacement
- Black Painted Finish
- Rim Width is 6 inches
- Thoroughly tested
- trustworthy quality
- better grip on the road
- effects on the fuel efficiency
Different Generations look
The Honda Fit would not be available in the United States until 2006 as a 2007 model. It succeeded the Civic hatchback as the market’s primary entry-level compact in North America.
The Fit was equipped with electric windows, airbag sensors, conventional airbags, and ABS to comply with Honda’s compliance with standards. The bumpers on the 2007 Honda Fit in the United States are also larger.
The 2008 model created new wiper blades and an automotive control mechanism that only implies whether or not a flat tire was discovered, rather than which tire was exploded.
There were two variants available: Base and Sport, both with a five-speed manual shifter and paddle transitions.
Second Generation Honda Fit
Fit’s second generation launched in 2007 and managed to win the Vehicle of the Year Asia Trophy for the second or third time. The car had a relatively long wheelbase, and it was broader overall.
There were two engines available: a 1.3-liter i-VTEC and a 1.5-liter i-VTEC. The hybrid version debuted in 2010 with an electric engine, and an electric car version, the Fit EV, was sold from 2013 to 2015.
Generally speaking, the second-generation Honda Fits do not even mean a major change for the average consumer.
The extended car and more simplified design, on the other hand, made it an awesome choice for improvements. The second-generation scored higher in crash tests than the first.
Third Generation Honda Fit
The third generation kept the ultimate conceptual model from earlier generations, such as the multi-configuration cabin idea and the core fuel tank.
Even after a 2-inch general size decrease, this production was able to increase boot space, passenger quantity, and wheelbase by using 780 MPa yield steel in 27 percent of its body panels.
The SOHC engine was overtaken in American versions by a 1.5-liter DOHC i-VTEC machine with fuel injection and an intake cam.
The North American Fit came with two transmitting options: a variable valve timing transmission and a 6-speed manual transmitter. The trim layer includes a backup camera in the rearview mirror.
Fourth Generation Honda Fit
In Europe, the fourth-generation Honda Fit is only available as a hybrid. Thee: HEV hybrid petrol engine replaces the i-DCP setup with Honda’s new dual-motor i-MMD system.
The front bend structure differs from previous generations in addition to enhancing enable the body. This Honda Fit has a flat dashboard and a sensor display without a visor.
You’re out of luck unless you’re reading this blog article in Japan, Europe, China, Hong Kong, or Malaysia. Because of lower sales from the third generation, the Honda Fit will most likely not be seen in the United States again. In this region, Honda has overtaken the FIt with the HR-V.
Can you make a Honda Fit fast?
Smarten the car and install either a turbocharger or a supercharger to create your Honda Fit better. The Fit produces 130 horsepower and 128 pound-feet of torque despite its gentle weight and size and 1.5-liter four-cylinder engine. That equates to a zero-to-60 time of 8.2 seconds, which isn’t bad.
How much HP can you get out of a Honda Fit?
A 1.5-liter four-cylinder engine powers the Fit. It produces 130 hp with the six-speed manual gearbox and 128 horsepower with the variable speed drive system (CVT).
Is Honda Fit being discontinued?
Honda will discontinue the Fit hatchback in the United States only after 2020. The company had recently launched its latest generation of the Fit for the rest of the western world, but we now have official confirmation that the new model will not be available in the United States.
Because of the large number of remanufactured replacement parts for use in Honda cars, the industry has achieved it simpler for its clients to customize their cars. Going on a trip?
Nevertheless, because the Honda Fit has been removed from the market in North America, you have a much more difficult time finding lower-cost accessories, which would become more difficult as the Fit model of cars is phased out. Moreover, check out our others mods, including Ford F150, Toyota Tundra, and Nissan Titan. Plus, to make extreme level modifications, you can also learn how to lower your car.
Keep in mind that alterations have little to no resale value, so only purchase these mods if you’re willing to pay for a personalized seat cover, stereo system or engine parts for a discontinued vehicle. If you want to get your feet wet in the world of modification, start with the least expensive machinery.